How to stop MacBook pro screen from going black

If you’re looking for instructions on how to stop MacBook pro screen from going black, you’ve arrived at the correct spot. I’ll show you how to accomplish precisely that in this post. Even if you’ve never used Windows, you’ve probably come across the term “black screen of death “or something similar. The fact that the MacBook screen turns black when completely opened isn’t a death sentence, but it is unpleasant and disrupts whatever activity you were doing before. It’s the type of issue that grinds everything to a standstill while being annoyingly unexpected, so we’ve compiled a list of solutions to assist you.

Examine Your Capacity:

If your MacBook Pro was recently charging, check to see if the plug was wrenched out of the wall or if the wire was tripped over. Check the number of cycles on your battery to discover whether it needs to be changed. To do so, follow these steps.

How to stop MacBook pro screen from going black

Step By Step Guidance:

  • Go to the Apple menu in the upper left corner of your Mac and pick about this Mac, then System Report from the drop-down menu.
  • Select Power from the correct side of the report after it has opened.
  • Look down from the power panel until you locate your battery’s cycle count and condition. It’s time to replace the battery in your MacBook Pro if it indicates “Poor” or “Bad.”

Start the computer in Safe Mode:

A black screen can occur for a variety of reasons, one of which is a problem with your starting disc. This problem can be resolved by booting your MacBook into standby mode and enabling it to do a disc check. Follow these procedures to enter safe mode:

  • Switch off your computer.
  • While restarting your computer, hold down the Shift key until you see the Apple logo.
  • After the logo displays, release the key. The computer will now boot into safe mode, which may take a bit longer than expected while it conducts inspections on your startup drive.
  • You can restart it after it has fully booted up to return to a regular startup mode.


If it’s not the battery (or you can’t get the system report right now to verify), rebooting the laptop is your next best option. This may be done in a number of different ways:

  • To open the dialogue box, hit CTRL + EJECT, then ENTER, even if you can’t see the dialogue box since “Shut Down” is automatically chosen. Once the computer has completed shutting down, hit the power key again to restart it.
  • A restart is triggered by pressing CTRL + CMD + EJECT at the same time.
  • To turn it off, press and power button for 5 seconds. To reset, wait 15 seconds and then push it again.
  • Your MacBook should now restart normally, and the black screen problem should be resolved.

Try a Key Sequence You’ve Seen Before:

A unique key sequence gleaned from the vaults of the MacRumors forum has assisted several people to address their black screen booting troubles, so it’s worth a go. Here’s what you need to do:

  • When you turn the power once, a shutdown dialogue box should appear (you won’t be able to view it with a blank screen).
  • To put your Mac to sleep, press the “S” hotkey.
  • To cause a hard shutdown, press and hold the power button.
  • To restart, wait around 15 seconds before pushing the power button again.

System Management Controller should be reset:

Another option for resolving a black screen is to do an SMC reset. This is useful to know since it can fix a variety of other problems with your MacBook, such as slowdowns caused by overheating. Follow these procedures to reset the SMC on your MacBook:

  • Turn off the computer.
  • Connect the power supply.
  • Hold down Shift, Control, Option, and the Power button at the same time for around 10 seconds with the MacBook turned off.
  • Allow the keys to be released.
  • Start the computer again.
  • Now is the time to reset the SMC.

Related Link:

To get more information visit this link below:

Leave a Comment